Latest Version Cat Caterpillar ET 2021A Electronic Technician Diagnostic Software With 1 Time Free Activation
Note:
1.After receiving the payment, we will send you the software by email.
2. we will remote help customer installed and activation for a single PC by Teamviewer!
Diagnostic Software Caterpillar ET 2021A (replaces CAT ET 2020B, 2019C, 2018A) :
1.Latest Caterpillar ET 2021A Software to work with CAT/CAT3 Truck Scanner
2.With one free activation, can send software online
3.Support Multi-languages：English, Chinese, Danish, French, German, Italian, Japanese, Portuguese, Russian, Spanish
4. OS:Windows 7 32 bit, Windows 7 64 bit, Windows 8/8.1 32 bit, Windows
8/8.1 64 bit, Windows 10 32 bit, Windows 10 64 bit PC, Communication
Hardware, and Cable Requirements
To run the service tool, the next PC, communication hardware, and cable requirements must be met.
NOTE: The minimum PC Configurations should not be used as a standard
when buying new personal computers for service tool purposes. If the
existing equipment meets these minimum requirements, it will run the
service tool.
PC Requirements
Recommended Configurations
PC containing a 2.0 GHz dual-core processor
3GB RAM
3GB of the available hard disk drive
DVD-ROM drive (optionally)
15.4-inch XGA Screen (1280×1024 compatible)
Microsoft Windows™ 7 Professional or Windows 8 Professional, Windows 10
Professional (Not tested with Home Edition) (Note: Windows 8 RT is not
supported)
RS232 port with 16550AF UART or compatible (for use with Comm Adapter II)
USB 1.1 or 2.0 port (for use with Comm Adapter 3)
Ethernet RJ45 connector
Built-in pointing device or mouse
For security purposes, Microsoft Internet Explorer version 11 or newer or Microsoft Edge is recommended.
Note: The most recent version of Microsoft Internet Explorer may not be validated to work with the service tool.
Caterpillar electronic technician 2021A with WinFlash future is an
updated version of the caterpillar dealer diagnostic software that can
help technicians to diagnose existing and potential problems with their
electronically controlled Caterpillar Engines and Machines.
To get the vehicle information the Cat ET software must be connected
to the Electronic Control Module (ECM). For this purpose, you need a
suitable diagnostic link adapter (DLA), for instance, Genuine CAT Comm
Adapter III .
The laptops with ARM CPUs (Snapdragon 8cx, Microsft SQ1, etc) type are not supported!
Microsoft ended extended support for Windows 7 as of January 2020.
The CAT ET service tool no longer supports Windows 7 as of the 2020B
release. The installation is still possible, but we’re not able to
guarantee the stable work of 2020B or later versions.
The list of supported CAT machines and engines can be found below:
Engines:
Electric Power
Electric Power Generation
Industrial
Marine Power Systems
Oil and Gas
Machines:
Articulated Trucks
Asphalt Pavers
Backhoe Loaders
Cold Planers
Compactors
Dozers
Drills
Excavators
Feller Bunchers
Forest Machines
Forwarders
Harvesters
Hydraulic Mining Shovels
Knuckleboom Loaders
Material Handlers
Motor Graders
Off-Highway Trucks
Pipelayers
Road Reclaimers
Site Prep Tractors
Skid Steer and Compact Track Loaders
Skidders
Telehandlers
Track Loaders
Underground – Hard Rock
Underground – Longwall
Underground – Room and Pillar
Utility Vehicles
Wheel Dozers
Wheel Excavators
Wheel Loaders
Wheel Tractor-Scrapers
What’s New – 2021A
No significant new features or feature enhancements
What’s New – 2020C
No significant new features or feature enhancements
What’s New – 2020B
Trainer Update – 299D3
The 299D3 Skid Steer Loader has been added to the Trainer application.
What’s New – 2020A
Product Status Report Updates
The Product Status Report has been updated to include throttle configuration information.
Built-in Factory Password Generator
The experimental feature allows you to decode (18-Bit passwords not supported) factory passwords
What’s New – 2019C
Indication of Selected Communications Adapter
The service tool now displays the selected communications adapter when
the service tool is disconnected. The adapter name is displayed in the
status area at the bottom right of the service tool window.
End of Support for Windows 7
Microsoft is ending extended support for Windows 7 as of January 2020.
The service tool will be ending support for Windows 7 as of the 2020A
release.
What’s New – 2019B
Automatic Product Status Report (PSR) Upload
The service tool includes a new tool that automatically uploads Product
Status Reports. The tool scans for newly generated Product Status
Reports and uploads them when an internet connection is available. The
default is that automatic report uploading is enabled. The Preferences
dialog has an option to disable the tool.
What’s New – 2019A
ECM Naming Changes
Certain ECMs connect to the service tool over two data links at the same
time. The service tool shows a message popup when the ECM is only
detected on one link. The service tool has been changed to add the text
**INCOMPLETE** in the ECM name when the connection is incomplete.
Service tool features that display a connection icon also use a new icon
for an incomplete connection.
What’s New – 2018C
No significant new features or feature enhancements
What’s New – 2018B
CEOS Fleet Configuration File TOP
A CEOS (Customer Electronic Option Selection) Fleet Configuration File
can be created/modified for an engine using the Service Tool. This is
available in connected and disconnected mode.
Error When Launching Service Tool
There is a Microsoft issue with upgrading libraries during an
installation involving certain versions of the C++ redistributable.
After a successful service tool installation, when trying to run the
service tool for the first time, one of the following errors may
occasionally appear: “The entry point could not be located in
api-ms-win-crt-runtime” or “The program can’t start because mfc140u.dll
is missing from your computer.” If either of these messages is
displayed, please let us know and we will send you to step by step
troubleshooting guide. This procedure requires administrator rights.
Service Tool License Corruption Issues with Windows 10 Updates
Windows 10 updates 1709 and 1803 will corrupt service tool licenses. Future Window 10 updates may do the same
If either of the license error messages is displayed, please let us know
and we will send you to step by step troubleshooting guide.
What’s New – 2018A
Trainer Update – 988K XE Wheel Loader
The 988K XE Wheel Loader has been added to the Trainer application.
What’s New – 2017C
Preferences Option to Save a Product Status Report to PDF
The Preferences dialog for the Product Status Report has changed. The
dialog contains a new checkbox to automatically save a Product Status
Report as a PDF file when the report is created. The service tool will
continue to automatically save Product Status Reports as an XML file.
What’s New – 2017B
Product Status Report Updates
The Product Status Report has been updated to include certain history
features supported by the ECM, such as the after-treatment Regeneration
History and the Service Test History.
Winflash Screen Update
The screen for the Winflash feature has been updated. A new Expand All
button opens all sections of the screen to show all details for ECMs
detected by WinFlash. A new Collapse All button hides all sections of
the screen, except for header rows showing detected ECM names.
Communication Hardware
Caterpillar Communication Adapter III
Configuring Cat Electronic Technician to use the Communication Adapter 3
For Cat Electronic Technician to work with the Communication Adapter 3,
the settings must be changed to select the Communication Adapter 3 as
the Communication Interface Device:
Step 1 Start Cat Electronic Technician.
Step 2 Click the Stop Connect button when it appears.
Step 3 Select the Utilities menu.
Step 4 Choose “Preferences > Modify…”.
Step 5 Select the Communications tab.
Step 6 Select Cat Comm Adapter 3 (RP1210) and click OK.
NOTE: Because a growing number of products require multiple data link
service, the “Enable Dual Datalink Service” checkbox has been
pre-selected.
Servicing ECMs on more than one data link requires this check box to be enabled.
Failure to do this will result in undetected ECMs and reduced functionality.
Package Includes:
1.Used Dell D630 laptop
2.Real CAT et3 Comm Adapter III(it’s best quality cat et 3,not adapter 2,please check Communication port)
3.USB Cable (From device to your computer)
4.J1939/J1708 9PIN Cable (from device to your truck)
5.6PIN Cable (for old truck)
6.14PIN Cable(for new truck)
7.Plastic box
留言列表
